Starting the camera for the first
time (FLIR K65)
6
Applicability: FLIR K65
The first time you start the camera, you need to unlock the camera by entering a camera
unique code. The code is based on the serial number of the camera. To get the camera
unique code, you must log in using a FLIR Customer Support account and register the
camera. If you already have an existing FLIR Customer Support account, you can use
the same login credentials.
Follow this procedure:
1. Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
2. Push the on/off button to turn on the camera. This displays the following dialog box:
3. To register the camera, use a computer or other device with internet access and go
to: http://support.flir.com/unlock.
4. To access the registration form, log in to your FLIR account or sign up for a new
account.
5. To find the serial number of your camera, push the Mode button. The serial number
(S/N) is displayed at the top of the screen.
6. To complete the registration and unlock the camera, you must enter an unlock code
into the camera. The code is available in your FLIR account, under My Products.
#T559946; r. BG/87484/87484; en-US
10
To Next Page
Loading...
