Quick start guide
7
Follow this procedure to get started right away:
1. Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
2. Push the on/off button to turn on the camera.
3. Aim the camera toward the object of interest.
4. Select a suitable camera mode by pushing the Mode button.
5. Pull the trigger to save an image.
6. To move images to a computer, do the following:
6.1. Connect the camera to a computer, using the USB cable.
6.2. Move the images using a drag-and-drop operation in Microsoft Windows
Explorer.
Note Moving an image using a drag-and-drop operation does not delete the
image in the camera.
Note The function of the trigger is configured by a setting, see section 12.14 Configur-
ing the camera.
#T559946; r. BG/87484/87484; en-US
12
To Next Page
Loading...
