Operation
12
2. Depending on the Trigger button configuration, do one of the following to start the
recording:
• With the Rec. on/off setting, pull the trigger.
• With the Record video setting, pull and hold the trigger.
3. A blinking circle in the middle left part of the screen indicates that the camera is cur-
rently recording a video clip.
4. Depending on the Trigger button configuration, do one of the following to stop the
recording:
• With the Rec. on/off setting, pull the trigger.
• With the Record video setting, release the trigger.
12.8 Continuous video recording (FLIR K55
and FLIR K65)
You can configure the camera to start a continuous video recording when you turn on the
camera. The recording cannot be stopped.
Note The continuous video recording functionality is configured by a setting, see sec-
tion 12.14 Configuring the camera.
12.9 Freezing the image
You can freeze the image.
Note The function of the trigger is configured by a setting, see section 12.14 Configur-
ing the camera.
Follow this procedure:
1. Aim the camera toward an object of interest.
2. Do the following:
• To freeze the image, pull and hold the trigger.
• To return to the live image, release the trigger.
12.10 Connecting the camera to a computer
You can connect the camera to a computer, using the USB cable.
Once connected, you can do the following:
• Change the camera settings, see section 12.14 Configuring the camera.
#T559946; r. BG/87484/87484; en-US
29
To Next Page
Loading...
