Operation
12
12.13.2 Restore factory default settings
You can restore all camera settings to the factory defaults.
Note This will also restore settings that have been changed using the FLIR K-series
camera configurator.
Follow this procedure:
1. Push the Mode and Zoom buttons at the same time. This displays the main menu.
2. Push the Zoom button to select
. This displays the settings menu.
3. Push the Mode button repeatedly until Restore is selected.
4. Push the Zoom button to select
. This displays a dialog box.
5. Do one of the following:
• Select
by pushing the Mode button to restore the factory default settings.
• Select
by pushing the On/off button to cancel the restore action and exit the
settings menu.
#T559946; r. BG/87484/87484; en-US
36
To Next Page
Loading...
