CAMERA SETUP:
Double click on the M-SERIES icon to open its configuration webpage. To configure a fixed IP address,
click on “Network Setup”:
Select the Static (fixed) option rather than Dynamic:
The screen will refresh, and the IP, Mask, and Gateway fields will change from grey to white,
indicating they can accept user entries. Once you have entered the appropriate IP address and subnet
mask (192.168.252.200 / 255.255.255.0 in this example), click on the “Save” link and wait 1 minute.
Note: You will not be able to access anymore the M-Series configuration page after changing its IP
address (until you change the IP address of your computer later in this process).
To Next Page
Loading...
Need help?
General
