FLIR MR160 - GETTING STARTED Document Identifier: MR160-QS-en-US_AC
USA – NASHUA
Support Site
FLIR Commercial Systems, Inc.
9 Townsend West
Nashua, NH 03063 USA
Telephone +1 855-499-3662
USA – PORTLAND
Corporate Headquarters
FLIR Systems, Inc.
2770 SW Parkway Avenue
Wilsonville, OR 97070 USA
Telephone: +1 503-498-3547
Customer Support
Technical Support Website http://support.flir.com
Technical Support Email TMSupport@flir.com
Service and Repair Email Repair@flir.com
Customer Support Telephone +1 855-499-3662 option 3 (toll free)
Firmware Updates
To check for MR160 firmware updates please visit the technical support website (above) for complete installation instructions.
Certificate of Conformity and ISO-9001 Quality Management System
FLIR Commercial Systems, Inc., an ISO 9001:2008 certified company, hereby certify that our instruments meet or exceed the
specifications stated in the user manuals.
This instrument was produced under the stringent guidelines of FLIR Commercial System’s certified ISO-9001 Quality Management
System from design to delivery. All instruments are calibrated and inspected to meet the stated specifications.
FLIR Commercial Systems, Inc. inspects its incoming shipments using an approved sampling plan with an Acceptable Quality Level
(AQL). All incoming inspections are performed using test equipment that is traceable to National Standards. Our ISO-9001 Quality
Management System extends to aftermarket support where tested quality procedures are applied to customer support, service,
calibration and repair processes.
This instrument will provide years of reliable service when used in accordance with the instructions provided in the User Guide. To
have this device certified please contact your local service center.
Quality Assurance Management
Publication Identification No.: MR160-QS-en-US
Release version: AC
Release Date: 2016 December
Language: EN
To Previous Page
Loading...
