Name: FLIR One Pro
Brand: FLIR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

2 EN-US English

2.1 Thank you!

Thank you for choosing a product from FLIR Systems. We hope that the product

will meet your expectations and that you will consider us again for your future

needs.

2.2 List of contents

• Infrared camera.

• Pouch.

• USB cable.

Note FLIR Systems reserves the right to discontinue models, parts or accesso-

ries, and other items, or to change specifications at any time without prior notice.

2.3 View from the front

See Figure 1.1 View from the front, page 1.

1. Visual camera.

2. Thermal camera.

3. Phone connector.

4. OneFit height control.

2.4 View from the bottom

See Figure 1.2 View from the bottom, page 1.

1. On/off switch and Power indicator.

2. Charge indicator LED.

3. USB-C power connector.

2.5 Quick start guide

1. Charge the FLIR ONE camera for approximately 1 hour.

2. Download and install the FLIR ONE app on your phone. The app is available

on the Apple App Store and the Google Play Store.

3. Push the On/off button on the bottom of the FLIR ONE camera to turn it on.

The indicator will flash green when the FLIR ONE camera is ready.

4. Connect the FLIR ONE camera to your phone. If needed, adjust the blue dial

of the OneFit and extend the connector to the appropriate length to fit your

phone’s protective case.

#T810402; r. AB/51263/51263; mul 2

Other manuals for FLIR One Pro

Questions and Answers:

Need help?

Do you have a question about the FLIR One Pro and is the answer not in the manual?

General

Temperature Range	-20°C to 400°C (-4°F to 752°F)
Battery Life	Approximately 1 hour
Frame Rate	8.7 Hz
Spectral Range	8 – 14 µm
Video Recording	Yes
Operating Temperature	0°C to 35°C (32°F to 95°F)
Thermal Resolution	160 × 120 pixels
Connector	Lightning (iOS), USB-C (Android)
Dimensions	68 × 34 × 14 mm
Weight	36.5 g
Field of View	55° x 43°
Focus	Fixed
Visual Camera	1440 x 1080
File Formats	Radiometric JPG, MPEG-4
Charging	USB-C
Non-Operating Temperature	-20°C to 60°C (-4°F to 140°F)
Accuracy	±3°C (±5.4°F) or ±5%, typical of difference between ambient and scene temperature. Apply 60 seconds after start-up when the unit is within +15°C to +35°C (59°F to 95°F) and the scene is within +5°C to +120°C (41°F to 248°F).