FLIR One Pro

USER GUIDE 2
FLIR ONE PRO USER GUIDE
The FLIR ONE Pro allows you to see the world in a whole new way, with
a unique blend of thermal and visible imaging. This User Guide provides
the information you will need to use the FLIR ONE Pro.
CHARGING THE FLIR ONE PRO
Plug the USB-C end of the power cable into the FLIR ONE Pro and
plug the other end into a 1A power source. The Charge Indicator LED will
blink while the device is charging. The FLIR ONE Pro will charge to full
capacity in about 1 hour. When the device is fully charged, the Charge
Indicator LED will be on continuously. The FLIR ONE Pro is not intended
to be charged while in use.