910-0001-00-MAN-R06 FLIR Proprietary Information Page 19 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
Communication with radar has been interrupted for at least
five (5) seconds.
Communication with radar is lost. The Operator can still
verify the last unit configured parameters and most recent
unit warnings. The Operator can manually delete the lost
icon.
Radar is in limited auto-recovery mode, with failure code
5.60. The Radar will try to recover from the failure
automatically.
Radar is in fail mode, with failure code 5.60. Refer to the
error codes section of the Installation Manual for explanatory
details.
Radar is transmitting and initial motor speed accuracy has not
yet been reached or is temporarily out of limits.
Radar is transmitting.
Target Combination Software is started (with TRaCS only).
Track Combination Software is started and tracking one (1)
intruder. Red circle around icon perimeter is blinking (with
TRaCS only).
Radar is transmitting and tracking three (3) intruders. Icon
perimeter (red circle) is blinking.
Radar is transmitting, tracking one (1) intruder and detecting
fourteen (14) contacts.
The radar is locked by this console for parameters and zones
editing.
The radar is locked by another console for parameters and
zones editing.
To Next Page
Loading...
Need help?
General
