910-0001-00-MAN-R06 FLIR Proprietary Information Page 61 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
2.2.8 Recording Data
2.2.8.1 Recording Intruders and Targets Data
The Recording of Intruders and Targets Data is enabled and disabled by right clicking on the radar
icon and selecting Record Targets/Intruders Log (Server), as shown in Figure 49. When enabled, a log
file is created by the Radar Server Application.
Figure 49 - Record Targets/Intruders Log Command
The Radar Server creates log files with the following format: YYYY.MM.DD Radar #XX Targets Logs.txt,
where #XX is the radar identification number. Figure 50 shows an example of a targets/intruders log
files:
Figure 50 - Targets/Intruders Log File Example
To Next Page
Loading...
Need help?
General
