910-0001-00-MAN-R06 FLIR Proprietary Information Page 28 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
2.2.4.3 Alternating Mode
This mode is used to sequentially alternate between up to 5 fixed sectors in azimuth and tilt angles.
When covering a 360° area around the radar, it is recommended to use either one of the following:
To optimize coverage: use 5 sectors spaced at 72° intervals, with a minimum duration of 12
seconds per sector
To minimize scan time: use 4 sectors spaced at 90° intervals, with a duration of 11 seconds
per sector
Figure 14 - Alternating Mode Configuration Parameters
To Next Page
Loading...
Need help?
General
