910-0001-00-MAN-R06 FLIR Proprietary Information Page 14 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
2.1.1 Application Status
The application status will read either ACTIVE, UNLINK or TIMEOUT. An ACTIVE application is
monitored by the Application Manager and will automatically re-start in the event of a crash, power
outage or system failure. An UNLINK status reflects an application started manually and that is not
monitored by the Application Manager. If the application closes or hangs, the Application Manager will
not re-start it. When either application with a status of ACTIVE or UNLINK closes or hangs, its status
changes to TIMEOUT.
2.1.2 Application Name
Displays the name (e.g. Radar Console, Radar Server, etc.) for each application listed.
2.1.3 Image Name
The image name contains the executable file name of each application.
2.1.4 Application Running Time
The application running time displays the duration that each application has been running. When an
application is re-started by the Radar Application Manager, the duration is reset to zero. Also, this
value is reset to zero every day at midnight.
2.1.5 Application Parameters
The application parameters field contains the command-line parameters used to start monitored
applications.
2.1.6 Event Log Window
The event log window contains a list of events that occurred since start-up of the Radar Application
Manager. These events include the (re)starting of applications, timeouts, etc.
To Next Page
Loading...
Need help?
General
