910-0001-00-MAN-R06 FLIR Proprietary Information Page 44 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
Figure 30 - Radar PPI (Continuous)
2.2.6.2 Radar PPI (Snapshot)
The Radar PPI (snapshot) command displays a screen capture of a specific moment in time. This
feature is useful for obtaining a snapshot of the radar returns in order to use it as a background (map-
like picture or overlay) for unchanging and known monitored areas. This mode can also be used for
troubleshooting. The Radar PPI (snapshot) mode uses very little bandwidth compared to the Radar PPI
Continuous mode.
To Next Page
Loading...
