FLIR Saros DM-695-S

This document does not contain any export-controlled information.
Installation
14
427-0200-00-12 - Revision 110 - May 2021
Step 1
Join parts 1 and 2 together.
Step 2
Tighten hex head cap screws
(clockwise).
Step 3
Fix assembled corner adapter to
the wall.
Step 4
· When using a wall mount bracket (pictured), affix the wall mount bracket onto the corner adapter with
washers in the front and screw nuts at the back.
· When using a power box, affix the power box onto the corner adapter.
CX-CRNR-G3 dimensions