FLIR Saros DM-695-S

This document does not contain any export-controlled information.
Operation
30
427-0200-00-12 - Revision 110 - May 2021
· For external I/O connections, set the current state
for the input and output pins, as shown at right.
You can configure the external I/O connections,
including the number of external input and output
pins, on the I/O Devices Page in System Settings.
3.2.5 PTZ Page
Use the PTZ page to:
· Move the camera left, right, up, or down (pan and tilt)
· Define the pan and tilt speed, between 1x-10x
· Zoom in and out—click once or click and hold for continuous zoom
· Go to the camera's home position
· Set the camera's current position as its home position
· Define preset positions:
a. Under Preset Position, click
Set Preset.
b. Select a preset index number
from 1-128. Selecting an index
number currently associated
with a preset position
overwrites the existing preset
position.
c. Specify a unique, descriptive
name for the preset position.
d. Click Add. The camera adds
the current position as a
preset.