FLIR Saros DM-695-S

This document does not contain any export-controlled information.
Installation
8
427-0200-00-12 - Revision 110 - May 2021
Pendant Cap Screw
Pendant Cap Screw Holes on Camera
8. Securely tighten the pendant cap screw into the camera. The screw prevents the camera from
rotating.
9. Try to rotate the camera and make sure it is not possible to rotate the camera.
Warning:
If the camera can be rotated, it could become loose and fall.
2.4.2 Wall Mount Bracket CX-ARMX-G3
Wall mount bracket (1.5 inch threaded).
Item
Details
Qty
Wall mount bracket
CX-ARMX-G3
1
Parts package
No. 3 Allen key
1
Sponge
2
Quick install guide
Summarized below
1