FLIR Saros DM-695-S

This document does not contain any export-controlled information.
Installation
12
427-0200-00-12 - Revision 110 - May 2021
2.4.4 Gooseneck Mount with Power Box CX-GSNK-G3
Gooseneck mount (1.5 inch threaded) with IP68 power box.
Item
Details
Qty
Gooseneck bracket and
power box
CX-GSNK-G3 box
1
CX-GSNK-G3
gooseneck pipe
1
Accessory box
No. 2 Allen key
1
No. 3 Allen key
1
No. 5 Allen key
1
No. 6 Allen key
1
M4x8 hex cap
double washer
2
Quick install guide
Summarized below
1
Step 1
Fix backplate on mounting
surface.
Step 2
Assemble power box and tighten
screws with No. 6 Allen key.
Step 3
Assemble gooseneck pipe on
backplate and power box.
Step 4
Attach pendant cap to gooseneck
pipe, complete cable
connections, and connect
camera to pendant cap.
Step 5
Rotate gooseneck pipe to the
position required. Tighten
hexagon nuts to the flange and
use No. 3 Allen key to tighten
M4x8 hex socket screws.
Step 6
Use No. 6 Allen key to fix cover
screws.