2 Disclaimers
2.1 Quality assurance
The Quality Management Systems under which the FLIR Si2x-Series is manufac-
tured has been certified in accordance with the following standards:
• EN ISO/IEC 80079-34
FLIR Systems is committed to a policy of continuous development, therefore
we reserve the right to make changes and improvements on any of the prod-
ucts without prior notice.
2.2 Copyright
© 2025 FLIR Systems, Inc. All rights reserved worldwide. No parts of the soft-
ware including source code may be reproduced, transmitted, transcribed or
translated into any language or computer language in any form or by any means,
electronic, magnetic, optical, manual or otherwise, without the prior written per-
mission of FLIR Systems.
The documentation must not, in whole or part, be copied, photocopied, repro-
duced, translated or transmitted to any electronic medium or machine readable
form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered trade-
marks or trademarks of FLIR Systems and/or its subsidiaries. All other trade-
marks, trade names or company names referenced herein are used for
identification only and are the property of their respective owners.
#T810652; r. AC/101642/101642; en-US 2
To Next Page
Loading...
