3 Safety information
3.3 Ex compliance marking
A non-removable label with the following markings is adhered to the bottom part
of the camera. If this label is missing or illegible, do not enter the potentially haz-
ardous area without consulting a suitably qualified person.
3.4 Certifications
Scheme Standards
ATEX EN IEC 60079-0:2018
EN 60079-11:2011
EMC
EN 300 328
EN 301 893
EN 301 489-1/-17
Safety (LVD) IEC 62368-1:2018
The FLIR Si2x-Series certifications are available online at
http://support.flir.com/resources/gq2z.
#T810652; r. AC/101642/101642; en-US 4
To Next Page
Loading...
