Operation
5
3. When engaged, the high end of the temperature range (>752℉ [400℃ ])
is accessible.
5.4 Type-K Thermocouple Measurements (TG267)
WARNING
Note the temperature range limit printed on the thermocouple connector (or verify the
range with the manufacturer). The supplied probe cannot be used to measure temperature
through the entire display range listed in the specification section of this manual; measur-
ing temperature beyond the range printed on the thermocouple connector can damage the
probe and the TG267. If the thermocouple does not include a range label, please contact
FLIR technical support.
WARNING
To avoid electrical shock, do not use this instrument when working near voltages > 24V
AC/DC. Do not allow the thermocouple to touch live circuitry.
WARNING
To avoid damage and burns, do not make temperature measurements in microwave ovens.
CAUTION
Repeated flexing can break the thermocouple leads. To prolong lead life, avoid sharp
bends, especially near the connector.
Figure 5.3 Supplied Type-K Thermocouple
#NAS100014; r. AJ/68076/68076; en-US
9
To Next Page
Loading...
