SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB Page 41 of 70
Antennvägen 6
SE-187 66 Täby
Sweden
1.5 Screen Symbology
General
The system presents symbology to the operator indicating the status of the system.
Fig 1 in § 1.13 illustrates the symbol set for all modes of operation and its relative
location on the screen.
Symbology description
1.5.1 Symbol area 1
This area is used to display the current gimbal mode and presents the same messages in
both thermal and TV modes of operation.
STOW: Indicates that the system is in STOW mode.
CAGE: Indicates that the system is in CAGE mode.
STEER: Indicates that the system is in STEER mode.
TRACK: Indicates that the system is in TRACK mode.
COAST: Indicates auto tracker is in COAST mode and working to re-acquire target.
1.5.2 Symbol area 2
This indicates the selected sensors mode, either manual or auto.
TI/A: Indicates that the Thermal imager (TI) is in auto span and level mode.
TI/M: Indicates that the Thermal Imager (TI) is in manual span and level mode
TV/A: Indicates that the TV is in automatic mode.
TV/M: Indicates that the TV is in the manual mode.
SP/AI: Indicates that the Spotter is in automatic iris mode.
SP/MI: Indicates that the Spotter is in the manual iris mode.
To Next Page
Loading...
