COVER
3. Avoid contact with the wings and Flite Jet
5
6
3
4
Flitescooter assembly
Inating Flitescooter
5. Keep distance
200m
6. Release the throttle
7. What’s in the box
Connect the handlebars to Flitescooter
Turn the handlebars upside down and place the Flite Controller wrist
strap over the bottom of the handlebars. Carefully slide the wrist
strap to the very top by holding onto Flite Controller.
With your other hand, lift the latch on the back of the Flite Controller
cavity. Place Flite Controller into the handlebar cavity and gently
push until you hear it click into place.
No relevant for scooter - image will be
removed
‘200m’ needs the right font
To Next Page
General