Maintenance and storage
READ THROUGH THE ENTIRE STORAGE AND MAINTENANCE INSTRUCTIONS
BEFORE STORING YOUR BOARD.
1 It is essential that your Flitescooter be serviced as per the
‘Maintenance schedule’ at the end of this User Guide to retain its
high level of performance, safety and reliability, including warranty,
as mentioned previously.
2 The service intervals are in hours of ride time or years, whichever
comes first.
3 The service schedule and intervals assume you will use your
Flitescooter in accordance with our guidelines.
Periodic checks
1 Ensure that you view our ‘Care and Maintenance video’
fliteboard.com/video before first using your Flitescooter.
2 Ensure that after each session, you visually inspect all elements of
your Flitescooter including board, wings, mast, handlebars, Flitecell
and Flite Controller for any damage or water ingress.
3 Ensure that you perform the 6 Month Flitecell Checklist located on
the Support page of the website.
4 Ensure all connections are clean, free from corrosion and damage
after each use.
5 Ensure the hinges have been rinsed with fresh water, are clean and
free from corrosion or damage after each use.
6 Ensure the handlebars have been rinsed with fresh water, are clean
and free from corrosion or damage after each use.
Maintenance schedule intervals
The hours / years intervals shown in the maintenance schedule section of
the User Guide are intended as a guide. If you operate a Fliteschool then
supplementary servicing may be necessary.
CAUTION: Avoid leaving your Flitescooter tied up in marinas or near
vessels for extended periods of time. Any earth leakage from surrounding
vessels can lead to accelerated corrosion of your eFoil components.
Please contact support@fliteboard.com for any queries or questions.
46
To Next Page
Loading...