STEP 6 - - - - - - - - - - - - -
Secure all loose wires and the wire from the wired remote to the lift
structure by cutting off pieces of the included double sided Velcro. The
best way to secure the wired remote is to go up from the Advanced Switch
Control and attach the wire to the inside of the canopy frame if you have
one. Then come down from the canopy frame to the side of your lift that is
against the dock. (Fig. 6A) and (Fig. 6B)
Page 8 of 8
Wired Remote
Fig. 6A
Wired
Remote
Velcro
Velcro
Fig. 6B
Wired
Remote
Battery Box
To Previous Page
Loading...
