Floe VSD 8000 - STEP 3: V-Brace Installation; V-Brace Clamp and Brace Fastening

10
STEP 3

SLIDE LOWER V-BRACE CLAMPS TOGETHER ON FRAME BEAM
BETWEEN CORNER POSTS “C” & “D” (FIGURE 3.1)
 FASTEN CLAMPS TO V-BRACES USING (2) 3/8” x 3 ½” BOLTS AND
(2) 3/8” NYLOCK NUTS (FIGURE 3.2).
TORQUE TO 35 FT-LBS (FIGURE 3.3).
 ATTACH UPPER V-BRACE CLAMPS TO CORNER POSTS “C” & “D”
USING (2) 3/8” x 6” BOLTS AND (2) 3/8” NYLOCK NUTS (FIGURE
3.4)
TORQUE TO 35 FT-LBS (FIGURE 3.5).
 ATTACH V-BRACES TO UPPER V-BRACE CLAMPS USING (2) 3/8” x 3
3/4” BOLTS AND (2) 3/8” NYLOCK NUTS (FIGURE 3.4).
TORQUE TO 35 FT-LBS (FIGURE 3.6).
FIGURE
3.1
FIGURE
3.2
FIGURE
3.3
INSIDE OF LIFT
OUTSIDE
OF LIFT