Floe VSD 8000 - Page 11

11
STEP 3

ATTACH UPPER V-BRACE CLAMPS TO CORNER POSTS “C” & “D” USING (2) 3/8” x 6” BOLTS AND (2) 3/8” NYLOCK NUTS (FIGURE 3.4 & 3.5)
TORQUE TO 35 FT-LBS (FIGURE 3.6).
 ATTACH V-BRACES TO UPPER V-BRACE CLAMPS USING (2) 3/8” x 3 3/4” BOLTS AND (2) 3/8” NYLOCK NUTS (FIGURE 3.4 & 3.5).
TORQUE TO 35 FT-LBS (FIGURE 3.7).
FIGURE
3.5
FIGURE
3.4
FIGURE
3.6
FIGURE
3.7