Floe VSD6500 - Assembly Instructions Manual

SHEET 1 OF 16
FLOE FULL LENGTH PONTOON &
TRI-TOON BUNKS
LARGE LIFTS
ASSEMBLY INSTRUCTIONS
KIT P/N 511-02477-00, 511-02488-00, 511-02489-00 (TRI-TOON ADD-ON)
INSTRUCTION P/N:
611
-
0
2
488
-
00
RELEASED 5/29/19
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com
*LIFT
S
NOT INCLUDED
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY
RECOMMEND THAT YOU CONSULT WITH YOUR BOAT’S MANUFACTURER TO
ENSURE THAT YOU ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY
POTENTIAL DAMAGE.
TOOLS REQUIRED
-(2) 9/16” SOCKET/WRENCH
-15/16” SOCKET/WRENCH
-TAPE MEASURE
-TORQUE WRENCH
-0.406” (13/32”) DRILL BIT &
DRILL (MAY BE NECESSARY
FOR 10,000# LIFTS)
VSD10000
VSD6000
-
8000
PONTOON