FLOJET G-57 Series - User Manual

4.58
(116)
0.25
(6.4)
5.27
(134)
Air Exhaust
Muffler
2.20
(56)
1.84
(47)
0.92
(23)
0.71
(19)
3.21
(82)
4.52
(115)
5.81
(148)
Fluid OutFluid In
Air Inlet
PRODUCT DATA
Pump Design ............................................Duplex Diaphragm
W
etted Parts
.
...
D
iaphragm Material Santoprene ® or Viton ®
Check Valve Seat Material Santoprene ® or Viton ®
Housing and check valve material
................Polypropylene (Glass Reinforced)
Springs ..........................................Hastelloy
Ports ......................................Gas Inlet & Outlet 1/4” (6.3 mm)
Product Inlet 3/8” (9.5 mm) - 1/2” (12.7 mm) - 3/4” (19.1 mm)
Product Outlet 3/8” (9.5 mm) - 1/2” (12.7 mm) - 3/4” (19.1 mm)
Net Weight ..............................................1.2 Pounds (0.54kg)
® A registered trade mark of Monsanto Co.
® A registered trade mark of I.E. DuPont Co.
PERFORMANCE SPECIFICATIONS
PUMP
Liquid Temperature Min ............................................40°F (4.4°C)
.
...........................Max ......................................120°F (48.9°c)
Priming ..............Dry ..........................................15 ft. (4.5 m)
............................Wet ..........................................20 ft. (6.1 m)
Flow Rates ........Max ....................Up to 5 GPM (18.9 L/min)
Gas Supply Pressure ..............20 to 100 PSI (1.4 to 6.9 bar)
Noise Level ........Max ......................................................87dB
DESCRIPTION
FLOJET Industrial G-57 Series Pumps are designed for
general commercial and industrial applications. These
pumps are constructed from a selection of materials for
handling a broad range of chemicals.
Allowed fluids for Not Allowed fluids for
Santoprene
®
materials Santoprene
®
materials
Potable Water, Acids Oils, Solvents,Soaps with
Alkaline, Soaps Solvents, D-Limonene,
Alcohols, Ketones Aromatic Hydrocarbons
Allowed fluids for Not Allowed fluids for
Viton
®
materials Viton
®
materials
Oils, Solvents, D-Limonene, Ketones, Acetones,
Aromatic & Halogenated Automotive Brake Fluid,
Hydr
ocarbons, Acids
Ammonia, Ethanol
Santoprene and Viton Material with 1/2” Ports
G-57 Series
Industrial Air Driven Pump
DIMENSIONAL DRAWING
Inches (millimeters)
Dimensional tolerances ± 0.06 inches
Consult factory if precise details are required.
40
(
2.8)
20
(1.4)
6
0
(4.1)
8
0
(5.5)
100
(
6.9)
Flow in GPM (l/min)
*Indicates Airlet Pressure
Pressure in PSI (Bar)
0
1.0
(3.8)
2.0
(7.6)
3.0
(11.4)
4.0
(15.1)
5.0
(18.9)
6.0
(22.7)
100*
80*
60*
40*
20*
INSTALLATION & OPERATION INFORMATION FOR MODELS G573XXX THROUGH G575XX

FLOJET G-57 Series Specifications