20 ICON, FOOTHILL RANCH, CA
CO2 OR DRY COMPRESSED AIR OPERATED
MODEL : N5100-XXX
OPERATING PRESSURE 20 TO 80 PSI
6.18
(157)
2.42
(61)
2.22
(56)
1.00
(25)
0.77
(19)
2.89
(74)
1.98
(50)
4.14
(105)
PRODUCT DATA
Pump Design ............................................Duplex Diaphragm
Wetted Parts
Diaphragm Material
....................Santoprene
®
, Viton
®
or Buna
Check Valve Materials
....................
Santoprene
®
, Viton
®
or Buna
Housing material ........................................Acetal Copolymer
Ports ............................Gas Inlet & Outlet 1/4” (6.3 mm) Barb
Product Inlet 3/8” (9.5 mm) Barb
Product Outlet 3/8” (9.5 mm) Barb
Net Weight ....................................................1.10 lb. (0.5 Kg)
PERFORMANCE SPECIFICATIONS
PUMP
Liquid Temperature
Min ......................................40°F (4.4°C)
............................Max ................................120°F (48.9°C)
Priming ..............Dry ......................................28 ft. (8.5 m)
............................Wet ....................................32 ft. (9.8 m)
Flow Rates ........Max ............Up to 1.92 GPM (7.3 L/min)
Gas Supply Pressure ............20 to 80 PSI (1.4 to 5.6 bar)
Noise Level ........Max ................................................87dB
STANDARD MODELS
N5100-010 ..........Buna
N5100-020 ..........Viton
®
N5100-030 ..........Santoprene
®
DESCRIPTION
FLOJET Industrial N5100 Series Pumps are designed for
light general commercial and industrial applications.
These pumps are constructed from a selection of
materials for handling a broad range of chemicals.
Allowed fluids for Not Allowed fluids for
Santoprene
®
materials Santoprene
®
materials
Potable Water, Oils, Solvents, Soaps with
Alkaline, Soaps
Solvents, D-Limonene, Acids,
Alcohols, Ketones Aromatic Hydrocarbons
Allowed fluids for Buna Not Allowed fluids for
& Viton
®
materials Buna & Viton
®
materials
Oils, Solvents, D-Limonene,
Ketones, Acetones,
Aromatic & Halogenated Automotive Brake Fluid,
Hydrocarbons Ammonia, Ethanol, Acids
®
A registered trade mark of Monsanto Co.
®
A registered trade mark of I.E. DuPont Co.
Santoprene, Buna & Viton Material with 1/2” Ports
N5100 Series
Industrial Air Driven Pump
DIMENSIONAL DRAWING
Inches (millimeters)
Dimensional tolerances
± 0.06 inches
Consult factory if precise
details are required.
40
(2.8)
20
(1.4)
60
(4.1)
80
(5.5)
Flow in GPM (l/min)
*Indicates Air Inlet Pressure in PSI
Pressure in PSI (Bar)
0
0.5
(1.9)
1.0
(3.8)
1.5
(5.7)
2.0
(7.6)
3.0
(11.4)
2.5
(9.5)
80*
60*
40*
20*
INSTALLATION & OPERATION INFORMATION FOR MODELS N5100XXX
N5100 Series Industrial Air Driven Pump
To Next Page
Need help?
General
