FLOS ARCO - User Manual

ARCO LED
DESIGN BY ACHILLE AND PIER GIACOMO CASTIGLIONI

Summary

General Instructions and Safety

Safety Guarantee

Safety is guaranteed by following these installation and use instructions.

Important Installation Remarks

Ensure power is off, no modifications, cable replacement by qualified personnel.

Technical Specifications

Lists technical specifications, e.g., 1 LED 28W.

Cleaning and Maintenance Guidelines

Clean with soft cloth, water, mild soap; avoid alcohol/solvents.

Assembly Steps

Fig.1 Base and Cable Assembly

Detailed steps for passing the cable through the shaft and securing it to the base.

Fig.2-4 Conduit and Reflector Attachment

Steps for assembling conduits, attaching reflector, and small conduit.

Fig.5-6 Electrical Connections

Connecting cables, switch, and mains power supply.

Fig.7 Power Supply Unit Connection

Connecting the plug to the feeder unit and locking it.

Device Operation and Cleaning

Fig.8 Control and Dimming Functions

On/off control via button, progressive dimming of light intensity.

Remote Operation Capability

Device can be operated with a remote switch for last light intensity.

Fig.9 Diffuser Removal for Cleaning

Lift reflector from grille by sliding along conduit and shaft.

Fig.10-11 Diffuser Cleaning Process

Unscrew, remove, clean diffuser with soft dry cloth, and re-assemble.

FLOS ARCO Specifications

General

Designer	Achille and Pier Giacomo Castiglioni
Year of Design	1962
Light Source	LED
Socket	E27
Voltage	220-240V
Dimmer	Yes
Cord Length	270 cm
Material	Stainless steel
Dimensions	240 cm height
Bulb Type	E27
Color	Stainless steel
Adjustability	Adjustable height