Flotec FPHP25 Series - Repair Parts and Troubleshooting; Model FPHP25 Parts List; Troubleshooting Guide

Repair Parts 4
Troubleshooting
For parts or assistance, call Flotec Customer Service at 1-800-365-6832
SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION
Pump plunger moves Pump is not picking up prime Reprime pump. See “Priming Pump” in Owner’s Manual.
but no water is
Leak in suction side of pump Suction pipe is sucking air. Check joints for leaks with soapy water.
delivered
Well is gaseous Consult factory about installing a sleeve in the well.
Intermittent over-pumping of well Lower foot valve if possible. (Water drawn down below foot valve).
3349 1198
1
2
3
4
5
6
7
8
9
10
11
Key Part No.
No. Description Used
1 Pump Handle 1
2 Pump Cap 1
3 Lift Rod 1
4 Plunger Valve Cage 1
5 Plunger Valve 1
6 Cup Leather * 1
7 Cup Leather Holder 1
8 Pump Body 1
9 Check Valve 1
10 Valve Leather * 1
11 Base 1
Model FPHP25
* Included with Part No. FPP0025