To Next PageTo Next Page
Need help?Do you have a question about the Flotec FP4012-10 and is the answer not in the manual?
General| Brand | Flotec |
|---|---|
| Model | FP4012-10 |
| Category | Water Pump |
| Language | English |
Key instructions for safe installation, operation, and maintenance of the pump.
Warnings and guidelines to prevent electric shock, burns, or death during pump operation.
Covers burn risks, freezing, work area cleanliness, and user safety during operation.
Explains the 12-month warranty period, coverage, exclusions, and eligibility requirements.
Steps for removing an old pump and installing a new one, ensuring proper plumbing connections.
Detailed instructions for installing the pump suction piping using a driven point well.
Guidance for installing the pump suction pipe in a 2” or larger cased well.
Instructions for setting up the pump for surface water sources, like sprinkler applications.
Details on connecting the pump discharge to a pre-charged pressure tank.
Instructions for connecting the pump to a standard pressure tank with an air volume control.
Tips for ensuring air and water-tight threaded connections using PTFE tape.
Guide to setting motor voltage and ensuring correct switch configurations for operation.
Instructions for safe electrical wiring, including grounding and power supply connections.
Chart detailing appropriate wire gauges and fuse ratings based on motor HP and distance.
Step-by-step guide to filling the pump and piping with water to establish prime.
Procedures to protect the pump and piping from freezing temperatures.
