To Next PageTo Next Page
Need help?Do you have a question about the Flotec FP4022-10 and is the answer not in the manual?
General| Discharge Size | 1-1/2 in |
|---|---|
| Cord Length | 10 ft |
| Voltage | 115V |
| Construction | Thermoplastic |
| Pump Type | Submersible |
| Motor Type | Induction |
| Thermal Protection | Yes |
| Housing Material | Thermoplastic |
| Impeller Material | Thermoplastic |
| Phase | Single Phase |
| Discharge Pipe Size | 1-1/2 in |
| Inlet/Outlet Size | 1-1/2 in |
Essential safety guidelines, symbols, and warnings for safe operation and maintenance of the pump.
Critical precautions regarding electrical shock, burns, and fire hazards during pump installation and use.
Details the manufacturer's warranty period, coverage, and conditions for product defects.
Precautions and steps for making safe and correct electrical wiring connections to the pump.
Detailed steps for properly grounding the pump and connecting power supply wires.
Procedure for filling the pump and piping with water to remove air before initial operation.
Diagnosing and resolving issues when the pump motor fails to start.
Identifying causes and solutions when the pump runs but does not deliver water.
