To Next PageTo Next Page
Need help?Do you have a question about the Flotec FP4032-10 and is the answer not in the manual?
General| Model | FP4032-10 |
|---|---|
| Category | Water Pump |
| Horsepower | 1/3 HP |
| Voltage | 115V |
| Power Source | Electric |
| Housing Material | Thermoplastic |
| Impeller Material | Thermoplastic |
| UL Listed | Yes |
| Maximum Head | 25 feet |
| Discharge Size | 1-1/4" NPT |
| Outlet Size | 1-1/4" NPT |
Core instructions for safe product use, installation, and maintenance.
Details electrical hazards and precautions, including shock and burn risks.
Covers burn risks, freezing prevention, work area safety, and explosion hazards.
Steps for safely connecting the pump's wiring, grounding, and power supply.
Step-by-step instructions for priming the pump before initial operation.
Addresses issues where the pump motor fails to start.
Diagnoses and fixes for pumps not delivering water or delivering less than capacity.
