Flotec FPSE3200A User Manual

Flotec FPSE3200A

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

®

OWNER’S MANUAL

Submersible Solids

Handling Pumps

NOTICE D’UTILISATION

Pompes submersibles

pour les matières solides

MANUAL DEL USUARIO

Bombas submergibles para el

manejo de líquidos con sólidos

Installation/Operation/Parts

For further operating, installation,

or maintenance assistance:

Call 1-800-365-6832

English . . . . . . . . . . . . . . . Pages 2-6

Installation/Fonctionnement/Pièces

Pour plus de renseignements

concernant l’utilisation,

l’installation ou l’entretien,

Composer le

1 (800) 365-6832

Français . . . . . . . . . . . . Pages 7-11

Instalación/Operación/Piezas

Para mayor información sobre el

funcionamiento, instalación o

mantenimiento de la bomba:

Llame al 1-800-365-6832

Español . . . . . . . . . . .Paginas 12-16

P.O. Box 342, Delavan, WI 53115

Phone:

1-800-365-6832

Fax:

1-800-526-3757

E-Mail:

info@flotecwater.com

Web Site:

http://www.flotecwater.com

©2006 FP587 (Rev. 10/27/06)

2800A, 3200A SERIES

Table of Contents

Questions and Answers:

J
Joshua AustinAug 3, 2025
What to do if my Flotec FPSE3200A fails to operate?
- W
  washingtonautumnAug 3, 2025
  If your Flotec Water Pump isn't working, start by ensuring the power cord is properly connected to the outlet. Disconnect the power before handling the pump or motor. Also, verify that there is electrical power available at the outlet. Check that the fluid level is sufficient to activate the switch or controller. Make sure the 3/16" vent hole in the discharge pipe isn't blocked. Examine the pump inlet, impeller, check valve, and discharge pipe for any obstructions. If the thermal overload tripped, let the motor cool down for 30 minutes before reconnecting it, and then investigate the cause of overheating.
J
Justin WilsonAug 13, 2025
Why is my Flotec FPSE3200A Water Pump failing to empty the sump?
- W
  wjohnsonAug 13, 2025
  If your Flotec Water Pump isn't emptying the sump, ensure that all valves in the discharge line are fully open. Clear any blockages from the discharge pipe and check valve. Also, inspect the pump inlet and impeller for obstructions. It's possible that a higher capacity pump may be required if the current pump isn't adequately sized for the job.
F
fclarkAug 23, 2025
What to do if my Flotec FPSE3200A Water Pump will not shut off?
- L
  lwilliamsAug 25, 2025
  If your Flotec Water Pump won't shut off, check the switch or controller automatic floats for correct operation and placement. Refer to the installation instructions for the switch/controller for guidance.

Flotec FPSE3200A Specifications

General

Brand	Flotec
Model	FPSE3200A
Category	Water Pump
Language	English

Summary

Flotec Submersible Solids Handling Pumps Owner's Manual

Operation, Installation, and Parts Assistance

Contact for operating, installation, or maintenance assistance for Flotec pumps.

Safety, Performance, and Installation Guidelines

Essential Safety Instructions

Crucial safety instructions and hazard warnings for pump operation.

Pump Installation and Piping

Guidelines for pump installation, including piping requirements for different applications.

Pump Performance Specifications

GPH flow rates at different discharge heads for pump models.

Installation, Electrical, Operation, and Service

Electrical Requirements and Safety

Electrical safety precautions and wiring guidelines for pump installation.

Operation, Overload Protection, and Maintenance

Notes on pump operation, dry running, overload protection, and general servicing.

Fuse Data and Circuit Breaker Sizing

Specifications for fuses and circuit breakers for pump models.

Flotec Pump Repair Parts

2800A, 3200A Series Repair Parts List

List of replacement parts with model numbers for 2800A and 3200A series pumps.

Flotec Pump Troubleshooting Guide

Troubleshooting: Pump Fails to Operate

Steps to diagnose and resolve issues when the pump does not operate.

Troubleshooting: Pump Fails to Empty Sump

Troubleshooting steps for a pump that fails to empty the sump.

Troubleshooting: Pump Will Not Shut Off

Solutions for a pump that continuously runs and does not shut off.

Cord Lift Safety Warning

Critical safety warning about lifting the pump by its power cord.

Flotec Pump Warranty Information

Pump Warranty Period Exceptions

Details warranty periods for specific pump models and accessories.

General Warranty Terms and Conditions

Terms and conditions governing the product warranty and exclusions.

Related product manuals

Preview: Flotec FPSE9000

Flotec FPSE9000

Flotec FPSE4500A

Preview: Flotec FPSC2200A

Flotec FPSC2200A

Preview: Flotec FPSC1725X

Flotec FPSC1725X

Preview: Flotec FP4155

Flotec FP4332-08

Preview: Flotec FPUS1860A

Flotec FPUS1860A

Preview: Flotec FP4012-10

Flotec FP4012-10

Preview: Flotec FP0S1800A

Flotec FP0S1800A

Flotec FP0S2400A

Preview: Flotec FP5172-08

Flotec FP5172-08