Need help?Do you have a question about the Flow Focus and is the answer not in the manual?
General| Max Nozzle Temperature | 260°C |
|---|---|
| Max Bed Temperature | 100°C |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Layer Resolution | 0.05 - 0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD card |
| Display | LCD |
| Power Requirements | 110-240V, 50-60Hz |
To Next Page