To Next PageTo Next Page
Need help?Do you have a question about the Flowmatic FMRO5-M-MT and is the answer not in the manual?
Specifies temperature, pressure, pH, TDS, and hardness requirements for the RO system.
Instructions for connecting the adapta valve to the cold water supply line.
Steps for turning on water, checking for leaks, and initial flushing.
Detailed steps for performing maintenance every six months.
Procedure for annual system maintenance, including final filter replacement.
Information on membrane life expectancy and when to replace it.
Addresses common issues like low production, leaks, and noise with causes and solutions.
Details system performance, reduction percentages, and operating conditions.
General| Stages of Filtration | 5 |
|---|---|
| Model | FMRO5-M-MT |
| Daily Production | 50 gallons per day |
| Storage Tank Capacity | 3.2 gallons |
| Installation | Under-sink |
| Operating Pressure | 40-100 psi |
| Operating Temperature | 40-100 °F |
| Category | Reverse Osmosis System |
| Filter Life | 6-12 months |
| Connection Size | 1/4 inch |
| Warranty | 1 year |
