Check air pressure when tank is empty.
Checking Air Pressure in the Tank
Use a digital air gauge to check the air pressure in the tank. You
should always have between 5 -7 psi on an empty tank. If you have
more than 7 psi release air and recheck. If you have less than 5 psi,
add air. Air can be added with a bicycle pump.
Note:
Your unit comes with a stand for your storage tank (model FRO5-
M-MT only)to sit on if you need to turn the unit on its side. This
allows air fl ow under the tank keeping moisture and standing water
from rusting out the bottom of your tank which voids your warranty.
Use a digital air gauge to check the air pressure in the tank. You
should always have between 5 -7 psi on an empty tank. If you have
more than 7 psi release air and recheck. If you have less than 5 psi,
add air. Air can be added with a bicycle pump.
Valve is located at the base of the tank. You will need to unscrew the
black cap in order to check the air pressure
To Next Page
Loading...