Worcester 13 / 14 Series User Instruction – WCENIM0002-01
Page 2 of 13
1 General Information
These instructions must be read prior to installing, operating, and maintaining
this equipment.
These instructions must be read prior to installing, operating, using, or maintaining the
equipment in any region worldwide. The equipment must not be put into service until all of
the safe operating conditions noted in the instructions have been met. Failure to comply with
the information provided in the User Instructions is considered to be misuse. Personal injury,
product damage, delay in operation, or product failure caused by misuse are not covered
by the Flowserve warranty.
1.1 Scope of manual
These instructions must be kept close to the product’s operating location or directly
with the product.
These instructions must be read prior to installing, operating, using, or maintaining the
equipment in any region worldwide. The equipment must not be put into service until
all of the safe operating conditions noted in the instructions have been met. Failure
to comply with the information provided in the User Instructions is considered to be
misuse. Personal injury, product damage, delay in operation, or product failure
caused by misuse are not covered by the Flowserve warranty.
This document covers the Worcester 13 / 14 series:
Pressure rating – Variable
Size range – DN 15 – 50, NPS ½ - 2
1.2 Disclaimer
Information in this User Instruction is believed to be complete and reliable. In spite of
all Flowserve’s efforts to provide comprehensive information and instructions, sound
engineering and safety practices should always be used. Please consult with a
qualified engineer.
Flowserve manufactures products to applicable International Quality Management
System Standards as certified and audited by external Quality Assurance
organizations. Genuine parts and accessories have been designed, tested, and
incorporated into the products to help ensure continued product quality and
performance in use. As Flowserve cannot test parts and accessories sourced from
other vendors the incorrect incorporation of such parts and accessories may
adversely affect the performance and safety features of the product. The failure to
properly select, install, or use authorized Flowserve parts and accessories is
considered to be misuse. Damage or failure caused by misuse is not covered by
Flowserve’s warranty. In addition, any modification of Flowserve products or removal
of original components may impair the safety of these products in use.
To Next Page
Loading...
Need help?
General
