Flowserve 13 Series - 3 Product Information; Certification

Worcester 13 / 14 Series User Instruction – WCENIM0002-01
Page 4 of 13
3 Product Information
3.1 Certification
This product is compliant with the following EU regulations:
a) Pressure Equipment Directive (PED) 2014/68/EU: If the ID plate carries the CE
mark, PED number ‘2014/68/EU’, and the notified body identity number ‘0086’,
the product complies with the PED. If these numbers are not present, the product
is classified under Sound Engineering Practice (SEP) and may only be used within
the limitations defined in tables 6, 7, 8 and 9 of the PED.
b) Explosive Atmospheres (ATEX) 2014/34/EU: If the ID plate carries the CE mark,
ATEX number ‘2014/34/EU’, the explosion protection symbol, and ATEX codes
identifying the equipment, the product complies with the ATEX directive.
Figure 1 Valve ID plate markings (DN 32 and above)
Figure 2 Valve ID plate markings (DN 25 and below)