Fluance RT80 - Specifications

Fluance RT80/RT81 User Manual
17
Specifications
Specications RT80 RT81
Cabinet Specications
Material MDF MDF
Finish Painted High Gloss (Black) High Gloss Walnut
Dust Cover Yes - Tinted Yes - Tinted
Turntable Specications
Drive System Belt Drive Belt Drive
Motor DC Motor DC Motor
Speed 33 1/3 RPM, 45 RPM 33 1/3 RPM, 45 RPM
Wow and Flutter 0.2% 0.2%
Speed Variation +/-1.00% +/-1.00%
Signal-to-Noise Ratio
(Weighted)
67dB or higher
(A-weighted, 20kHz LPF)
67dB or higher
(A-weighted, 20kHz LPF)
Signal-to-Noise Ratio
(Unweighted)
60dB or higher
(unweighted, 20kHz LPF)
60dB or higher
(unweighted, 20kHz LPF)
Platter Aluminum Aluminum
Diameter of Platter 12", 30cm 12", 30cm
Auto-Stop Yes Yes
Turntable Mat Felt Rubber
Tonearm Specications
Type Static Balanced, S-Type Static Balanced, S-Type
Supported Cartridge Weight 3.5 to 6.5g 3.5 to 6.5g
Anti-skating Adjustment Yes Yes
Pivot Bearing Yes Yes
Material Aluminum Aluminum
Effective Tonearm Mass 28.2 grams 28.2 grams
Overhang 19.2mm 19.2mm
Effective Tonearm Length 224mm 224mm
Headshell Mount H-4 Bayonet Mount H-4 Bayonet Mount
Tonearm Height 17mm 17mm
Tonearm Wire 4 x 33 AWG Litz Cable 4 x 33 AWG Litz Cable
Cartridge Specications
Type Moving Magnet (MM) Moving Magnet (MM)
Cartridge Model Audio Technica: AT91 Audio Technica: AT95E
Replacement Stylus ATN91 ATN95E
Stylus
0.6mil Bonded
Conical (Diamond)
0.4x0.7mil Bonded Elliptical
(Diamond)
Cantilever Carbon Fiber Aluminum
Mount Half inch Half inch
Frequency Response 20-20,000Hz 20-20,000Hz