Fluance RT80 - Installing the Counterweight; Installing the Headshell

Fluance RT80/RT81 User Manual
7
Step Two: Installing the Counterweight
1. Secure the tonearm using the
tonearm lock.
Step Three: Installing the Headshell
1. Remove the headshell from the
protective packaging and insert
into the end of the tonearm.
2. Slide the counterweight onto the end
of the tonearm with numbers facing
forward until it clicks on.
2. Tighten the locking nut until the
headshell is secure.
Tonearm Lock
Locking Nut
Headshell
Tonearm
Counterweight