12
Operating Your Television
Selecting Input Source
You can display the input screen menu by pressing SOURCE on the
remote control or SOURCE on the front panel, press e / d button to
select, press “OK” to confirm.
Video Menu Options
Press the MENU on the front panel or MENU on the remote control and then use e / d to select the Video
menu, press g or OK to enter (see picture below).
1. Use
e / d to select what you want to adjust in the Video menu.
2. Press OK or f / g to adjust (according to the hint below)
3. When you are satisfied with your adjustment, press MENU.
Picture Mode
Select the type of picture which best corresponds to your viewing preferences by selecting Picture Mode in
the PICTURE menu. You may select the picture mode directly by pressing the P.STO button on the remote
control.
Brightness
Press e / d and then use f / g to adjust the brightness of the picture.
Contrast
Press e / d and then use f / g to adjust the contrast of the picture.
Colour
Press e / d and then use f / g to adjust the sharpness of the picture.
Tint
Press e / d and then use f / g to adjust the tint of the picture.
Sharpness
Press e / d and then use f / g to adjust the tint of the sharpness of the picture.
Colour Temperature
Press “OK” to enter the submenu for Colour Temperature press f / g to select mode
----- User, Cool, Standard, Warm
Then press e / d to select the “R Gain, G Gain, B Gain” in “User” mode.
DNR
Press e / d and then use f / g to adjust the DNR of the picture.
To Next Page
Loading...