Fluid 8020917 - Connecting Power; Pairing the Wireless Subwoofer

10
Connecting Power
Warning:
- Ensure that the power supply voltage corresponds to the
voltage printed on the back or the underside of the unit.
- Before connecting the AC power cord, ensure you have
completed all other connections.
• Connectthepowercordofthemainunittoawalloutlet.
• ConnectthemaincabletotheAC~ Socket of the subwoofer
and then into a socket on the main unit.
- Ensure all connections are connected before connecting to the
main unit’s power socket.
Pairing the Wireless Subwoofer with the Main Unit
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged into the main sockets
and turned on. No cable is needed for connecting the two units.
• Whenthesubwooferispairingwiththemainunit,thePairIndicatorwillash.
• Whenthesubwooferispairedwiththemainunit,thePairIndicatorwilllightup.
NOTE:
- Do not press the Pair button on the rear of the subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the subwoofer with the main unit manually.
Manual pairing
1. Ensure that all the cables are well connected and the main unit is in Standby mode.
2. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will
enter the pairing mode and the Pair Indicator will blink quickly.
3. Press the /SOURCE button on the main unit or the button on the remote control to switch the
main unit on.
4. After the wireless connection succeeded, the Pair Indicator will light up.
5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable from the subwoofer
and then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.
NOTE:
• Ifthewirelessconnectionfailsagain,checkifthereisconictorstronginterference(forexample,
interference from an electronic device) around your location. Remove these conicts or strong
interferences and repeat the above procedures.
• Thesubwoofershouldbewithin6mofthesoundbarinanopenarea.
• IfaTVoranexternaldeviceisconnected,themainunitandthesubwooferwillswitchonautomati-
cally when the TV or the external device is switched on.
• IfthemainunitisnotconnectedwiththesubwooferanditisinONmode,thePOWERIndicatorwill
ash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.