Fluid 8020917 - Basic Operation; Standby;ON

11
Basic Operation
Standby/ON
When you rst connect the main unit to the wall outlet, the main unit will be in Standby mode.
- Press the /SOURCE button on the unit or the button on the remote control to switch the unit ON.
- Press the button again on the remote control or press and hold the /SOURCE button on the unit
to switch the unit back to STANDBY mode. The POWER indicator will light up red.
- Disconnect the main unit’s plug from the wall outlet if you want to switch o the unit completely.
- When there is no input signal (or weak input signal) in AUX/MP3 LINK/OPTICAL/ARC/HDMI 1/HDMI 2
and Bluetooth (Stop or Pause) for over 15 minutes, the unit will automatically switch to Standby mode.
Select Modes
Press the /SOURCE button repeatedly on the unit or the button on the remote control to switch
between AUX, MP3 LINK, OPTICAL, ARC, HDMI 1, HDMI 2 and BLUETOOTH modes.
Adjust the Volume
- Press the VOL +/– button on the unit or the
I / I
buttons on the remote control to adjust the
volume.
- If you wish to turn the sound o, press the button on the remote control. Press the button again
or press the VOL+/- button on the unit to resume normal listening.
Select a Preset Sound Eect
While playing, press the EQ button on the remote control to select between preset equalizers: Movie
(recommended for viewing movies), Music (recommended for listening to music).
- In MOVIE mode: Light o.
- In MUSIC mode: Light up solidly.
Aux/Mp3 Link/Optical/ARC/HDMI 1/HDMI 2 Operation
1 Ensure that the unit is connected to the TV or audio device.
2 While in ON mode, press the /SOURCE button repeatedly on the unit or the button on the
remote control to select AUX or MP3 LINK or OPTICAL or ARC or HDMI 1 or HDMI 2 Mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.