Fluke Biomedical IMPULSE 6000D

To Next Page

To Previous Page

Defibrillator/Transcutaneous Pacemaker Analyzer

Analyzing Defibrillators

OFF

DEFIB

Defibrillator/Pacer

PACER

fak11.eps

Figure 6. Defibrillator Test Connections

Main Page

Table of Contents7
Defibrillator Analyzer15
Introduction15
Intended Use15
Unpacking the Analyzer15
Safety Information16
Instrument Familiarization18
Turning the Analyzer on and off21
Accessing the Analyzer Tests22
Analyzing Defibrillators22
Testing Energy Levels22
Testing Defibrillator Synchronization24
Testing Defibrillator Charge Time25
Analyzing Pacemakers (7000DP Only)26
Setting up the Analyzer for Pacer Testing26
Performing a Pacer Asynchronous Test28
Performing a Pacer Demand Test29
Performing a Pacer Sensitivity Test30
Performing a Pacer Refractory Period Test31
Simulating ECG Signals32
Connecting to the ECG Terminals33
Setting a Normal Sinus Rhythm ECG Signal33
Setting a Performance ECG Signal33
Setting Pacer Interactive ECG Waves (7000DP Only)35
Selecting ECG Arrhythmias36
Selecting TV Paced37
Testing R Wave Detection37
Performing a Noise Immunity Test38
Setting Analyzer Setup Functions38
Setting up the Battery38
Setting up the Display39
Setting up Sound40
Displaying Instrument Information40
Controlling the Analyzer Remotely40
Maintenance41
Cleaning the Analyzer41
Maintaining Peak Battery Condition42
Accessories43
Specifications44
General Specifications44
Defibrillator Analyzer Specifications45
Transcutaneous Pacemaker Analyzer Specifications (Impulse 7000DP Only)52
Appendix A - Impulse 6000D/7000DP Remote Operation55
Ansur Test Guide55
Defibrillator Tests57
Energy Measurement Test57
Charge Time Test59
Sync Time Test59
Pacemaker Tests60
Pacer Parameter Test60
Pacer Refractory Test60
Pacer Sensitivity Test61
Pacer Demand Mode Test61
Asynchronous Mode Test62
ECG Pacer Interactive Test62
ECG Waveform Simulation Tests62
Normal Sinus Wave Simulation Test62
Arrhythmia Wave Test63
Performance Wave Simulation63
ECG R-Wave Test63
ECG Noise Immunity Test64
Battery Performance Tests64
Battery Capacity Test64
Defib Pulse Repetition Test65
Appendix B - Impulse 6000D/7000DP Test Templates67
Introduction67
Creating Test Templates67
Using Defibrillator Test Elements74
Energy Measurement Test74
Charge Time Test76
Synchronization Time Test77
Using Pacemaker Test Elements (Impulse 7000DP Only)78
Pacer Parameter Test78
Pacer Refractory Test80
Pacer Sensitivity Test81
ECG Pacer Interactive Test82
Pacer Demand Mode Test84
Asynchronous Mode Test85
Using ECG Waveform Simulation Test Elements85
Normal Sinus Wave Simulation85
Arrhythmia Wave Test86
Performance Wave Simulation87
ECG R-Wave Test88
ECG Noise Immunity Test89
Using Battery Performance Test Elements89
Battery Capacity Test89
Defib Pulse Repetition Test91

Fluke Biomedical IMPULSE 6000D - Page 23

Table of Contents

Other manuals for Fluke Biomedical IMPULSE 6000D

Related product manuals