Need help?Do you have a question about the Fluke Biomedical IMPULSE 7000DP and is the answer not in the manual?
General| Weight | 4.5 kg (9.9 lbs) |
|---|---|
| Dimensions | 254 mm x 216 mm x 127 mm (10 in x 8.5 in x 5 in) |
| Display | Color LCD |
| ECG Simulation | Yes |
| Arrhythmia Simulation | Yes |
| Type | Defibrillator Analyzer |
| Waveforms | Square |
| Pacer Load | 200 Ω to 2000 Ω |
| Power Requirements | 100 V to 240 V, 50 Hz/60 Hz |
Crucial safety guidelines, warnings, and cautions for preventing harm and damage during operation.
Explains how to navigate and select defibrillator tests like Energy, Sync, and Charge Time.
Procedure for testing defibrillator energy output, including waveform selection.
How to measure the defibrillator's synchronization response to ECG heart rate.
Method to measure the time taken for the defibrillator to charge to a specified energy level.
Technical details for energy output, load resistance, pulse, voltage, and current measurements.
Specifications for load selections, algorithms, current, pulse rate, width, and energy.
Step-by-step guides for running Defibrillator tests via Ansur software.
Guides for running Pacemaker tests (Parameter, Refractory, Sensitivity, Demand) using Ansur.
To Next Page
