Fluke Biomedical IMPULSE 7000DP User Manual

Impulse 6000D, 7000DP
Users Manual
30
Specifications
General Specifications
Temperature
Operating ............................................................10 °C to 40 °C (50
°F to 104 °F)
Storage................................................................-20 °C to +60 °C (-4
°F to +140 °F)
Humidity.................................................................10 % to 90 % non-condensing
Display ...................................................................LCD display
Communications...................................................USB device port for computer control
Modes of Operation ..............................................Manual and remote
Power .....................................................................Internal rechargeable NiMH battery pack for nine hours (typical) operation after full
charge, or the battery charger can operate the Analyzer and charge the battery
simultaneously.
Battery Charger.....................................................100 to 240 V input, 15 V/1.5 A output. For best performance, the battery charger should
be connected to a properly grounded ac receptacle.
Mechanical
Housing...............................................................ABS Plastic
Size (H x W x L) ..................................................13 cm x 32 cm x 24 cm (5 in x 13 in x 9.5 in)
Weight.................................................................3.0 kg (6.6 lb)
Safety Standards
CE .......................................................................IEC/EN61010-1 2
nd
Edition; Pollution degree 2
CSA.....................................................................CAN/CSA-C22.2 No. 61010-1; UL61010-1
Electromagnetic Compatibility Standards (EMC)
European EMC....................................................EN61326-1

Fluke Biomedical IMPULSE 7000DP Specifications

General

Brand	Fluke Biomedical
Model	IMPULSE 7000DP
Category	Measuring Instruments
Language	English