Defibrillator/Transcutaneous Pacemaker Analyzer
Maintenance
27
written test procedure), and integrates all test results into a
single test report which can be printed or archived. Ansur
manages your test procedures by allowing both manual
and visual automated test sequences.
The software works hand-in-hand with Fluke Biomedical
analyzers and simulators, creating a seamless integration
for:
• Visual inspections
• Preventive maintenance
• Work procedures
• Performance tests
• Safety tests
Ansur software utilizes plug-in modules to work with a
wide array of Fluke Biomedical instruments. The plug-in
module is a software interface to the Ansur test program.
Plug-ins provide test elements used by Ansur Executive
that use the same user interface for all analyzers and
simulators supported by an Ansur plug-in.
When you purchase a new Fluke Biomedical analyzer or
simulator, you can update your existing Ansur software by
installing a new plug-in. Each plug-in module allows you to
work only with the options and capabilities you need for
the instrument you are testing. The Analyzer’s remote
control commands are available in the Ansur Users
Manual.
Note
When the Analyzer is under remote control, the
defibrillator under test must be manually
operated. For example, to charge and shock.
Note
The stop button on the Ansur program will be
disabled when data is being communicated from
the Analyzer to the PC.
Maintenance
The Analyzer needs little maintenance or special care.
However, treat it as a calibrated measuring instrument.
Avoid dropping or other mechanical abuse that could
cause a shift in the calibrated settings. The Analyzer has
no internal user-serviceable parts.
Cleaning the Analyzer
W Caution
Do not pour fluid onto the Analyzer surface;
fluid seepage into the electrical circuitry may
cause the Analyzer to fail.
To Next Page
Loading...
Need help?
General
