Fluke 107 Specifications

Multimeters
3
• Do not exceed the Measurement Category (CAT) rating of the lowest rated
individual component of a Product, probe, or accessory.
• Remove the input signals before you clean the Product.
• Use only specified replacement parts.
• Use only specified replacement fuses.
• Have an approved technician repair the Product.
• Remove the batteries if the Product is not used for an extended period of
time, or if stored in temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.
• Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
For safe operation and maintenance of the Product, repair the Product before
use if the batteries leak.
General Specifications
Maximum voltage between any Terminal and Earth Ground: 600 V
Display (LCD) ................................................................... 6000 counts, updates 3/sec
Battery Type .................................................................... 2 AAA, NEDA 24A, IEC LR03
Battery Life ...................................................................... 200 hours minimum
Temperature
Operating ...................................................................... 0 °C to 40 °C
Storage ......................................................................... -30 °C to 60 °C

Fluke 107 Specifications

General

True RMS	Yes
Continuity	Yes
Diode Test	Yes
Data Hold	Yes
Backlight	Yes
Weight	200 g
Safety Rating	CAT III 600V
Display	Digital LCD
DC Voltage	600V
AC Voltage	600V
DC Current	10A
AC Current	10A
Battery Type	2 AAA batteries
Resistance	40 MΩ